If you seriously want to know why the FUTD Cut Off Mark matters for your admission dream, then you have to read this article completely.
Every admission season, one figure decides whether a candidate’s UTME effort translates into an admission letter or another year of waiting: the cut off mark. For UTME candidates eyeing the Federal University of Transportation, Daura (FUTD), the FUTD cut off mark for 2026/2027 is the most searched piece of information right now, and rightly so.
As Nigeria’s first university dedicated solely to transportation studies, located along the Kano Road axis of Daura town in Katsina State, FUTD has drawn growing interest from candidates who want to study railway, aviation, highway, and maritime-related disciplines in a specialised environment.
Knowing your cut off mark early helps you plan smartly, whether that means proceeding to Post-UTME screening, considering a change of institution on JAMB CAPS, or gauging how competitive your department is.
This guide brings you the verified FUTD cut off mark for 2026/2027, the departmental breakdown for all twenty courses, and everything you need on FUTD admission requirements, Post UTME screening, and Direct Entry, all in one place.
What is FUTD Cut Off Mark for 2026/2027?
The official FUTD JAMB cut off mark for 2026/2027 is 150. This aligns with the national minimum benchmark approved by JAMB and the Heads of Tertiary Institutions at the 2026 Policy Meeting on Admissions in Abuja, where 150 was retained as the minimum admissible score for university admission for the session.
FUTD’s management has since confirmed this benchmark on its own admission portal, announcing that candidates who scored 150 points or above with the relevant five O’Level credits, along with Direct Entry applicants, are eligible for the university’s online screening exercise, which kicked off on Monday, 15th June 2026.
This means that if you scored 150 or above in the 2026 UTME and selected FUTD as your first choice, you already meet the FUTD JAMB cut off mark requirement and can register for Post-UTME screening once your O’Level credits are in order.
FUTD Cut Off Mark 2026 Overview
| Institution Name | Academic Session | JAMB Cut Off Mark | Admission Status |
|---|---|---|---|
| Federal University of Transportation, Daura (FUTD) | 2026/2027 | 150 | Ongoing – Post-UTME screening commenced 15 June 2026 |
Candidates should note that public universities, including FUTD, are expected to conclude their admission exercise for the session by 31st October 2026, so it pays to register for screening as early as possible rather than waiting until the deadline approaches.
Is the FUTD Cut Off Mark Officially Released for 2026?
The general FUTD cut off mark of 150 for 2026/2027 is officially released and confirmed, not speculative. It came through two consistent channels: JAMB’s national policy directive fixing 150 as the floor for all Nigerian universities, and FUTD’s own admission office, which used that exact figure as the qualifying benchmark for its Post-UTME/Direct Entry screening exercise.
What FUTD has not separately published, as of this writing, is a formally broken-down departmental or course-specific cut off mark for 2026/2027.
As a young institution established in 2023, FUTD has generally applied one uniform JAMB cut off mark across all departments rather than the tiered system used by older universities like FUTA or FUTO.
In the 2025/2026 exercise, for example, every department carried the same general cut off mark, while Post-UTME aggregate expectations differed slightly by faculty, with Science historically expecting around 40 points and above and Engineering around 45 points and above.
Because of this, the departmental figures below are estimated based on previous admission patterns, and we will update this article once FUTD releases official course-specific figures.
FUTD Departmental Cut Off Mark for All Courses 2026/2027
The table below presents the FUTD departmental cut off mark for every course currently offered. Since the university has not issued course-specific figures for 2026/2027, all marks below are estimated based on previous admission exercises and FUTD’s practice of using one uniform institutional benchmark.
| Faculty | Course | JAMB Cut Off Mark |
|---|---|---|
| Basic Engineering | B.Eng. Civil Engineering | 150 |
| Basic Engineering | B.Eng. Electrical and Electronics Engineering | 150 |
| Basic Engineering | B.Eng. Mechanical Engineering | 150 |
| Basic Engineering | B.Eng. Mechatronics Engineering | 150 |
| Traffic and Transportation Engineering | B.Eng. Highway Engineering | 150 |
| Traffic and Transportation Engineering | B.Eng. Railway Engineering | 150 |
| Transportation Logistics, Mgt & Planning | B.Sc. Aviation Management | 150 |
| Transportation Logistics, Mgt & Planning | B.Sc. Aviation Security | 150 |
| Transportation Logistics, Mgt & Planning | B.Sc. Highway Transport Management | 150 |
| Transportation Logistics, Mgt & Planning | B.Sc. Highway Transportation Security | 150 |
| Transportation Logistics, Mgt & Planning | B.Sc. Logistics and Supply Chain Management | 150 |
| Transportation Logistics, Mgt & Planning | B.Sc. Inland Waterways Safety and Environmental Administration | 150 |
| Transportation Logistics, Mgt & Planning | B.Sc. Maritime Safety and Environmental Administration | 150 |
| Transportation Logistics, Mgt & Planning | B.Sc. Dry Port Management | 150 |
| Transportation Logistics, Mgt & Planning | B.Sc. Sea Port Management | 150 |
| Transportation Logistics, Mgt & Planning | B.Sc. Railway Transport Management | 150 |
| Transportation Logistics, Mgt & Planning | B.Sc. Railway Station Management | 150 |
| Transportation Logistics, Mgt & Planning | B.Sc. Railway Transport Security | 150 |
| Transportation Logistics, Mgt & Planning | B.Sc. Transportation Management | 150 |
| Transportation Logistics, Mgt & Planning | B.Sc. Transportation Planning | 150 |
“Estimated” means FUTD has not published a course-specific figure for 2026/2027; the projection is based on the university’s previous pattern of using one uniform cut off mark across departments.
Candidates targeting Civil, Mechanical, and Railway Engineering should still aim well above the minimum, since these departments tend to attract higher Post-UTME screening scores in practice even where the JAMB cut off mark stays uniform.
Full List of Courses Offered in FUTD by Faculty
FUTD currently runs three faculties, Basic Engineering, Traffic and Transportation Engineering, and Transportation Logistics, Management and Planning, housing eleven departments and twenty programmes centred entirely on the transportation industry. Below is the full, official breakdown.
Faculty of Basic Engineering
- Department of Civil Engineering: B.Eng. Civil Engineering
- Department of Electrical and Electronics Engineering: B.Eng. Electrical and Electronics Engineering
- Department of Mechanical Engineering: B.Eng. Mechanical Engineering and B.Eng. Mechatronics Engineering
Faculty of Traffic and Transportation Engineering
- Department of Highway Engineering: B.Eng. Highway Engineering
- Department of Railway Engineering: B.Eng. Railway Engineering
Faculty of Transportation Logistics, Management and Planning
- Department of Aviation Management: B.Sc. Aviation Management and B.Sc. Aviation Security
- Department of Highway Management: B.Sc. Highway Transport Management and B.Sc. Highway Transportation Security
- Department of Logistics and Supply Chain Management: B.Sc. Logistics and Supply Chain Management
- Department of Maritime Management: B.Sc. Inland Waterways Safety and Environmental Administration, B.Sc. Maritime Safety and Environmental Administration, B.Sc. Dry Port Management, and B.Sc. Sea Port Management
- Department of Railway Management: B.Sc. Railway Transport Management, B.Sc. Railway Station Management, and B.Sc. Railway Transport Security
- Department of Transportation Management and Planning: B.Sc. Transportation Management and B.Sc. Transportation Planning
FUTD Admission Requirements for 2026/2027
Meeting the FUTD cut off mark is only the first step. Candidates must also satisfy FUTD admission requirements covering UTME, O’Level, Direct Entry, and Post-UTME conditions before a final offer is made.
UTME Requirements
Candidates must select FUTD as their first-choice institution, score at least 150 in the 2026 UTME, and choose the correct subject combination for their course, typically English, Mathematics, Physics, and Chemistry (or a related science) for engineering programmes, and English, Mathematics, Economics or Geography, and one other relevant subject for management courses such as Logistics or Aviation Management. Candidates must also meet the approved minimum age for tertiary admission.
O’Level Requirements
Every applicant needs at least five credit passes in WAEC, NECO, or their equivalent, in not more than two sittings. Engineering courses require English, Mathematics, Physics, and Chemistry, while management and logistics courses generally require English, Mathematics, and three other relevant subjects such as Economics, Geography, or Commerce.
Direct Entry Requirements
FUTD also admits Direct Entry candidates into 200 level, including those with a minimum of Lower Credit in a relevant National Diploma (ND), NCE holders with relevant teaching subjects, and candidates with IJMB or A-Level passes related to their intended course. Direct Entry candidates must hold the same five O’Level credits required of UTME candidates and must select FUTD as their first choice before registering for screening.
FUTD Post UTME Screening
The FUTD Post UTME exercise for 2026/2027 runs fully online via futd.edu.ng, where candidates log in using their UTME registration number as username and state of origin as password. Screening began on 15th June 2026, and candidates must upload their O’Level results, UTME slip, age evidence, and a passport photograph after paying the standard, non-refundable screening fee.
| Admission Route | Minimum Requirement | Key Step |
|---|---|---|
| UTME Candidates | 150 in 2026 UTME + 5 O’Level credits | Register for FUTD Post-UTME screening online |
| Direct Entry Candidates | ND/NCE/IJMB with relevant credits + 5 O’Level credits | Select FUTD as first choice, then register for DE screening |
| Post-UTME Screening | Eligibility confirmed | Pay screening fee, upload documents, await result |
Frequently Asked Questions
1. What is the FUTD cut off mark for 2026/2027?
The FUTD cut off mark for the 2026/2027 academic session is 150, matching JAMB’s national minimum for university admission.
2. Is the FUTD cut off mark the same for all courses?
Yes, for now. FUTD has historically applied one uniform JAMB cut off mark across departments rather than setting different marks per course, and this pattern continues into 2026/2027.
3. Can I apply to FUTD if I scored exactly 150 in JAMB?
Yes. A score of 150 meets the minimum requirement and qualifies you to register for Post-UTME screening, provided you also have the required five O’Level credits.
4. Has FUTD released an official departmental cut off mark for 2026/2027?
No separate breakdown has been published yet. Figures in this article are estimated from previous trends and will be updated once FUTD releases official course-specific figures.
5. When did the FUTD Post UTME screening for 2026/2027 begin?
The online screening exercise commenced on Monday, 15th June 2026, through the official FUTD admission portal.
6. What O’Level subjects do I need for FUTD admission?
You need a minimum of five credits, including English Language and Mathematics, plus other subjects relevant to your chosen course, such as Physics and Chemistry for engineering programmes.
7. Does FUTD accept Direct Entry candidates?
Yes. FUTD admits Direct Entry candidates with relevant ND, NCE, or IJMB qualifications into 200 level, subject to meeting the O’Level credit requirements.
8. What courses does FUTD offer?
FUTD offers twenty programmes across three faculties, covering engineering courses like Civil, Mechanical, Mechatronics, Highway, and Railway Engineering, alongside management-focused courses such as Aviation Management, Logistics and Supply Chain Management, Maritime Safety, and Transportation Planning.
9. When is the admission deadline for the 2026/2027 session?
Public universities, including FUTD, are expected to conclude admission by 31st October 2026, so candidates should complete screening and document upload well ahead of this date.
10. What happens if my JAMB score is below 150?
A score below 150 makes you ineligible for university admission for 2026/2027, including FUTD. You may change institution to a polytechnic, where the minimum is lower, or prepare to rewrite UTME the following year.
Conclusion
The FUTD cut off mark for 2026/2027 is officially confirmed at 150, in line with JAMB’s national benchmark for universities, and FUTD’s admission portal has already begun screening eligible candidates from 15th June 2026. While a uniform departmental cut off mark of 150 currently applies across all twenty courses based on previous admission trends, candidates should still aim higher, especially for competitive engineering and logistics programmes, to improve their chances at Post-UTME screening.
Meet the O’Level, UTME, or Direct Entry requirements outlined above, register promptly on the official FUTD portal, and keep checking trusted sources for the latest FUTD admission news as the exercise progresses toward its October deadline.
